New In Store

Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat
Shop Now

Latest News

Ierakstiet, ko meklējat:
+371 27 875 475 P.-Pk.: 11:00-19:00 | S. – Sv.: Pēc vienošanās
StereoPlus / NAD C 388
NAD C 388NAD C 388NAD C 388NAD C 388NAD C 388
NAD C 388
NAD C 388
NAD C 388
NAD C 388
NAD C 388

NAD C 388

1699.00

NAD C 388 ir integrēts pastiprinātājs.

Jauda 150 W vienam kanālam 4 un 8 omi. DAC pieņem signālu no divām koaksiālajām un divām optiskām ieejām, aptX Bluetooth modulis

Divi aizmugurējā paneļa porti ir paredzēti paplašināšanas slotiem:

  • MDC Blue OS-2 ļauj pievienot Bluesound tīkla atskaņotāja funkciju (MQA, Roon Ready)
  • MDC HDM-2 ļauj pievienot HDMI pārslēgšanu.

Ir arī priekšpastiprinātāja izeja biamp savienojumam, 6,3 mm austiņu ligzda un divi AC izeju pāri.

    • 629 €
    • 679 €
    • 429 €

Description

Key Features

  • 150W x 2 Continuous power into 8 or 4 Ohms
  • Bluetooth A2DP with aptX supported
  • MM Phono input
  • Analogue line inputs
  • USB port for service purposes
  • SPDIF coax and optical inputs
  • Speaker A, Speaker B
  • Preamp/Subwoofer out
  • Headphone amplifier
  • MDC Slots for future upgrades
  • IR remote
  • Smartphone Control App
  • 12V Trigger in/out
  • IR in/out
  • RS-232 Serial port for control
  • Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

Preamplifier

Line Input, Pre Out

  • THD (20Hz-20kHz) <0.005% at 2V out
  • Signal/Noise Ratio >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
  • Channel Separation >80dB (1kHz); >70dB (10kHz)
  • Input Impedance (R and C) 22 kilohm + 100pF
  • Maximum Input Signal >4.5Vrms (ref. 0.1% THD)
  • Output Impedance Source Z + 240 Ohm
  • Input Sensitivity 93mV (ref. 500mV out, Volume maximum)
  • Frequency Response ±0.03dB (20Hz-20kHz)
  • Maximum voltage output – IHF load >4.5V (ref. 0.1% THD)
  • Tone Controls
    • Treble: ±7.0dB at 20kHz
    • Bass: ±7.0dB at 60Hz
    • Balance: -10dB

Phono Input, Pre Out

  • THD (20Hz-20kHz) <0.01% at 2V out
  • Signal to Noise Ratio
    • >84dB (200 Ohm source; A-weighted, ref. 500mV out)
    • >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)
  • Input Sensitivity 1.44mV (ref. 500mV out, Volume maximum)
  • Frequency Response ±0.3dB (20Hz-20kHz)
  • Maximum Input Signal at 1kHz >80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

  • THD (20Hz-20kHz) <0.005% at 1V out
  • Signal/Noise Ratio >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
  • Frequency Response ±0.3dB (20Hz-20kHz)
  • Channel Separation >60dB at 1kHz
  • Output Impedance 6 Ohms

General Specifications

  • Continuous output Power into 4 Ohms and 8 Ohms (Stereo)
  • >150W (at rated THD, 20-20kHz, both channels driven)
  • IHF Dynamic Power
    • 8 Ohm 250W
    • 4 Ohm 350W
    • 2 Ohm 400W
  • THD (20Hz-20kHz) <0.02% (250mW to 150W, 8 Ohm and 4 Ohm)
  • Signal/Noise Ratio >95dB (A-weighted, 500mV input ref. 1W out in 8 Ohm)
  • Clipping Power >160W (at 1kHz 0.1% THD)
  • Peak Output Current >20A (in 1 Ohm, 1ms)
  • Damping Factor >150 (ref. 8 Ohm, 20Hz and 6.5kHz)
  • Frequency Response±0.03 (20Hz-20kHz)
  • Channel Separation
    • >75dB (1kHz)
    • >70dB (10kHz)
  • Input Sensitivity (for 80W in 8 Ohm) Line In: 490mV; Phono In: 7.5mV; Digital In: 24% FS
  • Sample Rate up to 24 bit/192kHz
  • Frequency Band 2.402G – 2.480G
  • Maximum Transmit Power (dBm) 7dBm ±2dBm

Power Consumption

  • at Auto Standby ON and Network Standby OFF 0.5 Watts*
  • at Auto Standby ON and Network Standby ON 1.2 Watts**
  • OFF mode (Power switched OFF) 0.1 Watts

 * – After 20 minutes of no user interface interaction and no active source input

** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input

NOTE: Bluetooth connectivity is always live when configured

Weight & Dimensions

  • Gross Dimensions (W x H x D)* 435 x 120 x 390mm (17 1/8 x 4 3/4 x 15 3/8)”
  • Net Weight 11.2kg (24.7lb)
  • Shipping Weight 13.6kg (30lb)

Additional information

RAŽOTĀJI