New In Store

Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat
Shop Now

Latest News

Ierakstiet, ko meklējat:
P.-Pk.: 11:00-19:00 | S.-Sv.: Pēc vienošanās
StereoPlus / Parasound Hint 6
hint6_black_high_angleParasound Hint 6Parasound Hint 6Parasound Hint 6Parasound Hint 6Parasound Hint 6
Parasound Hint 6
hint6_black_back
hint6_black_inside
hint6_remote
hint6_silver_front
hint6_silver_high_angle

Parasound Hint 6

4298.00

HINT 6 ir integrēts pastiprinātājs. Aprīkots ar iebūvētu DAC. Jauda 180W (8 omi).

Aprīkots ar pieciem analogo RCA ieeju pāriem un vienu līdzsvarotu XLR ieeju pāri.

Arī ir aprīkots arī ar līdzsvarotām XLR un RCA izejām, ieskaitot priekšpastiprinātājam.

Description

Power Output – Both channels driven
(0.9% THD, 20 Hz – 20 kHz)
180 watts x 2 @ 8 Ω RMS
270 watts x 2 @ 4 Ω RMS Current Capacity
45 amps peak per channel Frequency Response
10 Hz – 100 kHz, +0/-3 dB
20 Hz – 20 kHz, +0/-0.5 dB Total Harmonic Distortion (THD)
< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω Interchannel Crosstalk
> 70 dB at 20 kHz
> 78 dB at 1 kHz Signal to Noise Ratio – IHF A-weighted
Line in: – 103 dB (input shorted)
Digital in: – 106 dB Amplifier Damping Factor
> 800 at 20 Hz Preamplifier Stage Input Sensitivity
300 mV in for 1 V at Preamp Output jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V Power Amplifier Stage Sensitivity
1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB Phono Stage Sensitivity / Input Impedance
MM: 41 dB / 47 k Ω
MC: 54 dB / 47 k Ω or 100 Ω High & Low Pass Crossover Slope
12 dB per octave Supported DAC Sampling Rates
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz Coax/Optical: up to 192 kHz / 24-bit PCM Digital to Analog Converter
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit USB 2.0 Controller
Savitech SA9227, 384 kHz / 32-bit Headphone Amplifier
Texas Instruments TPA6120A
Output Impedance 10 ohms XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return) Input Impedance
Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg Preamplifer Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg Dimensions
Width: 17-1/4″ (437 mm)
Depth: 16-1/4″ (413 mm)
Depth, with cables 17-1/4″ (437 mm)
Height, with feet: 5-7/8″ (150 mm)
Height, without feet: 5-1/4″ (133 mm), 3U Net Weight
33 lb. (15 kg) Shipping Weight
45 lb. (20.4 kg) Power Requirement
Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear panel