Description
Power Output
- 250 watts@8 Ω
- 450 watts@4 Ω
- 800 watts @2 Ω
- Power measurements are with 120 VAC: 0.15% THD, RMS continuous power, full audio band (20 Hz – 20 kHz)
Class A Power Output
- 8 Watts, bias set to high
- 4 Watts, bias set to low
Current Capacity 100 amps, peak
Slew Rate > 130 volts per microsecond
Frequency Response
- 2 Hz – 110 kHz, +0/-2 dB
- 20 Hz – 20 kHz, +0/-0.25 dB
Total Harmonic Distortion (THD)
- < 0.15 % at full power
- < 0.02 % at typical listening levels
IM Distortion < 0.03 %
TIM Unmeasurable
Input Impedance
- Unbalanced: 50 kΩ
- Balanced: 100 kΩ, (50 kΩ per leg)
S/N Ratio,inputs shorted
- >120 dB, IHF A-weighted, bias set to Low
- >118 dB, IHF A-weighted, bias set to High
- >110 dB, Unweighted, bias set to Low
- >108 dB, Unweighted, bias set to High
Total Gain
- 29 dB (Gain switch set to normal)
- 23 dB (Gain switch set to low)
Input Sensitivity for 28.28 V into 8Ω (Gain switch set to normal)
- Unbalanced: 1V
- Balanced: 1V per leg
DC Trigger Requirements +9 Vdc to +12 Vdc, 5 mA
Audio Trigger Requirement 2.5 mV – 10 mV
XLR Pin Identification
- 1 = Ground (Shield)
- 2 = Positive
- 3 = Negative (Return)
Dimensions
- Width: 17.25″ (437 mm)
- Height without feet: 3.5″ (89 mm), 2U
- Height with feet: 4.125″ (105 mm)
- Depth: 20″ (508 mm)
- Depth with cables: 21.5″ (546 mm)
Net Weight 42 lbs (19.1 kg)
ShippingWeight 50 lbs (22.6 kg)
PowerRequirement
- Standby:<1 Watt
- Idle (bias set to low): 125 Watts
- Idle (bias set to high): 240 Watts
- Typical Listening levels: 300 Watts
- Maximum: 800 Watts
