| Audio Specifications |
Input Terminal |
RCA: 1, BAL: 1, TRIGGER IN: 1 |
| Output Terminal |
TRIGGER OUT: 1 |
| Rated Output Power |
100 W + 100 W (8 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven), 200 W + 200 W (4 ohm, 20 Hz-20 kHz, 0.07% THD, 2-ch driven), 400 W (8 ohm, 20 Hz-20 kHz, 0.07% THD, Monaural driven) |
| Dynamic Power Per Channel |
[IHF] 125 W + 125 W (8 ohm), 170 W + 170 W (6 ohm), 250 W + 250 W (4 ohm), 500 W + 500 W (2 ohm) |
| Dynamic Headroom |
0.97 dB (8 ohm) |
| Maximum Output Power |
220 W + 220 W (4 ohm, 1 kHz, 0.7% THD) |
| IEC Output Power |
125 W + 125 W (8 ohm, 1 kHz, 0.02% THD) |
| Maximum Effective Output Power |
[JEITA, 1kHz, 10% THD]135 W + 135 W (8 ohm), 270 W + 270 W (4 ohm) |
| Power Bandwidth |
10 Hz-50 kHz (8 ohm, 0.1% THD, 45 W) |
| Damping Factor |
300 or higher (8 ohm, 1 kHz) |
| Input Sensitivity / Input Impedance |
(BAL) 2.0 Vrms / 47 kohm, (LINE) 1.0 Vrms / 47 kohm [1 kHz 100 W / 8 ohm conversion] |
| Maximum Input Signal Voltage |
(BAL) 2.20 Vrms [1 kHz, 0.5% THD], (LINE) 1.10 Vrms [1 kHz, 0.5% THD] |
| Frequency Response |
+0 dB / -3 dB (5 Hz-100 kHz), +0 dB / -0.3 dB (20 Hz-20 kHz) |
| Total Harmonic Distortion Plus Noise |
2ch driven: 0.035% (LINE [BAL] to SP Out, 20 Hz-20 kHz, 50 W, 8 ohms), Monaural driven: 0.05% (LINE [BAL] to SP Out, 20 Hz-20 kHz, 200 W, 8 ohms) |
| Channnel Separation |
90 dB or higher (1 kHz, Input 1.0 kohm Terminated), 70 dB or higher (10 kHz, Input 1.0 kohm Terminated) |
| Signal-to-Noise Ratio |
[IHF-A network, Input 1 kohm shorted] 110 dB |
| Residual Noise |
[IHF-A network] (BAL) 40 uVrms, (LINE) 50 uVrms |
| Meter Class |
The 2.5th class |
| General |
Power Consumption |
400 W |
| Standby Power Consumption |
Off Mode: 0.1 W, Standby Mode: 0.2 W |
| Maximum Power Consumption |
800 W |
| Power Management (Auto Power Standby) |
Yes |
| Dimension (W×H×D) |
435 x 180 x 464 mm; 17-1/8” x 7-1/8” x 18-1/4” |
| Weight |
26.9 kg; 59.3 lbs. |
