Description
LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz)
<0.002 % at 2 V out
Signal-to-Noise Ratio
>106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
Channel separation
>100dB (1 kHz); >90 dB (10 kHz)
Input Impedance (R and C)
56 kohms + 100 pF
Maximum input signal
>4.6 Vrms (ref. 0.1 % THD)
Output impedance
Source Z + 320 ohms
Input sensitivity
65mV (ref. 500 mV out, Volume maximum)
Frequency response
±0.3 dB (20 Hz – 20 kHz)
Maximum voltage output -IHF load
>>5 V (ref. 0.1 % THD)
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz)
<0.01% at 2 V out
Signal-to-Noise Ratio
>84dB (200 ohms source; A-weighted, ref. 500 mV out)
Input sensitivity
46 kohms/100 pF
Frequency response
±0.3 dB (20 Hz – 20 kHz)
Maximum input signal at 1kHz
>80 mVrms (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
THD (20Hz – 20kHz)
<0.005% at 1V out
Signal-to-Noise Ratio
>107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
Frequency response
±0.3 dB (20 Hz – 20 kHz)
Channel separation
>62 dB at 1kHz
Output impedance
2.2 Ohms
LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
Continuous output power into 8 ohms and 4 ohms
2 x 80W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
Continuous output power into 8 Ohms (Bridge mode)<s/trong>
300W (ref. 20 Hz – 20 kHz at THD 0.03%)
THD (20 Hz – 20 kHz)
<0.03% (250 mW to 80 W, 8 ohms and 4 ohms)
IHF dynamic power
120W into 8 ohms
200W into 4 ohms
250W into 2 ohms
Peak output current
>26A (in 1 ohm, 1ms)
Damping factor
>150 (ref. 8 ohms, 20Hz to 6.5kHz)
Frequency response
>±0.3 dB (20 Hz – 20 kHz)
Channel separation
>90dB (1 kHz)
>75dB (10 kHz)
Input sensitivity (for 80 W in 8 ohms)
Line In: 201 mV, Digital In: 10.25% FS
GENERAL SPECIFICATIONS
Supports bit rate/sample rate
up to 32 bit/384 kHz
Frequency band
2.402GHz- 2.480GHz
Maximum transmit power (dBm)
7 dBm ± 2 dBm
DIMENSIONS AND WEIGHT
Gross dimensions (W x H x D)
435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
Net Weight
8.7kg (19.1lb)
Shipping weight
~11kg (24.2lb)
